Metal packaging
Steel packaging built like a rock — solid, long-lasting, printed to your brand
Golden, plain and printed tinplate cans, tins, pails, drums, aerosol cans, closures and printed sheets — made from our own coated steel.
Overview
From coated coil to finished can — one steel partner
Avighna carries its own tinplate and tin-free steel downstream into finished packaging. We cut, lacquer and offset-print sheet on our lines, then form it into cans, tins, pails, drums and closures for food, edible oil, dairy, paints, chemicals, personal care and gifting brands. Because substrate, printing and fabrication sit under one roof, you get consistent gauge, colour and seam quality with one point of accountability. Every pack is steel only — infinitely recyclable, hygienic, non-reactive and strong in transit — in bright golden, plain silver or fully printed finishes.
Our packaging range
Products that redefine excellence
Open any category for sizes, specifications, shapes and applications.
Shapes we make
Any outline your brand needs
Closures
Lid and closure types
Push-fit ring and plug — paints, coatings.
Loose-fitting cover — gifting, tea, snacks.
Pourable liquids — oil, lubricants.
Attached lid — pocket tins, mints.
Ring-pull or foil end — food, milk powder.
Locked ring closure — pails, chemicals.
Crimped valve seat on a domed top — sprays.
Hinged spout on a pail lid — oils, lubricants.
Easy-open & two-piece cans
Seamless cans that open by hand
A two-piece can is drawn from a single tinplate or tin-free steel disc into a seamless body, so only one end is seamed on. With no side seam there is no weld line to leak, the body can be printed all round, and shallow cans for fish, meat, pet food and ready meals stack neatly. Paired with a full-aperture easy-open end, the can opens by hand with no opener.
| Body | Seamless, drawn from one disc (DRD) |
|---|---|
| Material | Tinplate or tin-free steel, lacquered |
| End types | Full-aperture ring-pull, peel-off foil |
| Common diameters | 65 / 73 / 83 / 99 mm (211 / 300 / 307 / 401) |
| Processing | Suitable for retort sterilisation |
DRD (draw–redraw) seamless bodies, shallow and deep, round and oblong.
Scored ring-pull ends in common diameters such as 65, 73, 83 and 99 mm.
The ring lifts and peels the full panel — no opener, clean edge.
Tuna, sardines, meat, pet food, ready meals and snacks.
Typical industry values for reference — sizes and end types are confirmed per order.
Inside & outside
Coatings and finishes
Epoxy-phenolic or BPA-NI inner coating for direct food contact.
Lining that stops oils and fats reacting with the tinplate.
Linings chosen to match solvents, adhesives and agrochemicals.
Unprinted bright tinplate with a clear or golden lacquer finish.
2- and 4-colour printing of your artwork on the sheet before forming.
Gloss, matte or textured varnish, with embossed or debossed panels.
White inner lining for a clean look with dairy, fish and fruit.
Gold and silver effect inks and matte soft-touch overprints.
Lowest cost, because everything is under one roof
From raw coated steel to your finished, printed can — we control every step ourselves. No middlemen, no extra freight between vendors, no margin stacking.
Own raw material and in-house conversion remove middleman margins.
Coil, cutting, coating, printing and can forming in one chain.
Single point of accountability for quality and delivery.
No hand-offs between vendors — shorter lead times.
Why Avighna
Our own material, our own print, our own can lines
Tinplate, Tin-Free Steel (TFS) and TMBP — from our own processing lines plus assured sourcing.
- Tinplate · TFS · TMBP
- 0.13–0.60 mm thickness
- Own shearing & slitting
Fuji and Crabtree machines for lacquering and metal offset printing.
- 4 printing lines
- Sheet sizes 900 × 1000 to 945 × 1200 mm
- 2- and 4-colour print
Latest-technology plants for fast, steady output.
- Up to 150 cans / minute per line
- Fully automated
- Regular, scheduled production
Minimal human touch from sheet to sealed can.
- Completely hygienic
- Minimal human contact
- Uniform quality, every batch
Design your tin
From your artwork to a finished tin
Send your design, size and quantity.
We check colours and layout on screen.
A printed sample for you to approve.
Bulk run, packed and despatched.
- Food-contact safe inner coatings
- Seam and leak testing on every lot
- Thickness and temper checked at intake
- ISO certification planned from April 2027
Browse by industry
Find packaging for your sector
Why Tin Packaging Wins
Six structural reasons steel and tinplate outperform alternative packaging and construction materials.
Steel recycles forever without any loss of quality, keeping material in a genuine circular loop rather than downcycling toward disposal.
A complete barrier against light, oxygen and moisture — delivering shelf life flexible and plastic formats struggle to match.
Rigid construction and crimped closures make metal packaging difficult to tamper with undetected, protecting product and brand.
A smooth, rigid surface takes high-quality offset print directly, making the package itself a branding canvas.
Rigidity protects contents through stacking, handling and long-distance transport without secondary packaging.
An impermeable barrier holds in volatile aromatics — critical for coffee, ghee, spices and edible oils.